Tag Archives: beaded necklace

Pearl Necklace Making with Long Golden Chain


Hello, guys. Are you searching for pearl necklace recently? If yes, then you should pay more attention on this project. Today, I will show you a tutorial on how to make a long chain necklace with pearl beads. Do you have any interest for it? Then let’s just see it now.
Supplies needed in making pearl necklace:
Golden bead cap
12mm white pearl beads
8mm white pearl beads
Golden jump rings
Golden lobster clasp
Golden eyepins
Golden brass ball headpin
Golden iron chain
Wire cutting plier
Round nose plier
Flat plier
Step 1: make beaded dangles
Firstly, slide an 8mm pearl bead onto an eyepin and make a simple loop at the other end with jewelry plier.
Secondly, continue to make pearl beaded dangles with the same steps until you have 40 dangles in total.
Thirdly, connect all the dangles together one by one in order.
Step 2: finish this pearl and chain necklace making
Firstly, cut off a piece of golden chain with the same length of the beads link.
Secondly, connect two ends of the chains and beads link. Then add a lobster clasp to one end of the chain.
Thirdly, slide a 12mm pearl bead and a bead cap onto a headpin and make a simple loop at the end. And add this bead dangle to the middle part of the beaded link and connect two chains with a jump ring. Then connect two ends with lobster clasp.
Now this pearl beads and chain necklace has been finished!
Have you also finished this necklace making? It is easy to make, right? Then just share this project with your friends and they will like it. Have fun~


DIY Cluster Chain Necklace with Orange Beads


Hello, everyone. How is everything going with you guys? Have you made any jewelry recently? Then just show your nice crafts with us. And today I am going to show you a tutorial on how to make a cluster chain necklace with orange beads. Hope you will like this design!
Supplies needed in making chain necklace:
Orange drop glass beads
8mm orange red agate beads
4mm red crystal beads
4mm acrylic golden beads
10mm golden jump rings
0.3mm golden copper wire
Lobster clasp
Iron golden chain
Wire cutting plier
Round nose plier
Flat plier
Step 1: make beaded patterns for this chain necklace
Firstly, trim off the cooper wire about 10cm and slide a drop bead onto it. Then twist the two wires together and make a loop, then wrap the wire around the loop. And put the ends into the wrapped wire in case that it will hurt you. Then make another same 14 beaded dangles with the same steps.
Secondly, slide a red crystal bead onto the headpin and make a loop at the end. Then make another 3 same patterns.
Thirdly, make four links with acrylic golden beads with the same way.
Fourthly, slide an agate bead onto an eyepin and make a simple loop at the other end. Then make another same ten bead links.
Step 2: attach all the links we made last step
Firstly, connect ten agate bead links and nine 10mm golden jump rings together, and keep one bead one jump ring.
Secondly, add four crystal bead links and four drop bead links onto the left two jump rings and the ring two jump rings respectively.
Thirdly, add a drop bead dangle and a golden bead dangle and a drop bead dangle onto other jump rings besides the middle one.
Fourthly, connect an agate bead link and a drop bead link together, and add two drop bead links and the agate and drop link onto the middle jump ring. Just as this picture shows.
Fifthly, cut off two chains about 10cm, and you can decide the length according to you neck. Then connect two chains with a lobster clasp.
Now, this chain necklace is finished!
Do you want to try it after seeing this tutorial? We need to make many beaded links before we make this necklace, but it is really easy. Or you can add your own ideas in your necklace making, I believe you can also make very beautiful necklace. See you next time!

DIY Multi Strands Chain Necklace with Glass Beads


Hello, guys, how are you? Do you want to make any accessories recently? Then congratulations, because today I am going to show you a beautiful necklace. You will know how to make it after seeing this tutorial. Then let’s make this multi strands chain necklace with black glass beads together.
Supplies needed in making multi strands chain necklace with glass beads:
8mm black glass beads
Golden iron chain
Golden eyepins
Golden lobster clasp
Golden jump rings
Wire cutting plier
Flat plier
Step 1: make beaded part
Slide a black glass bead onto an eyepin and make a loop at the end. Then repeat sliding until we get 16 beaded parts.
Step 2: cut off the chain to get two 22cm chains, two 20cm chains, two 19cm chains and two 18cm chains, as picture shows.
Step 3: Finish final part
Firstly, connect two 18cm chains with one black glass bead part, connect two 19cm chains with three beaded parts, connect two 20cm chains with five beaded parts and connect two 22cm chains with seven beaded parts. Then it is the below picture.
Secondly, attach all ends of the chains with the jump ring and do it to other ends. Then connect two jump rings with a lobster clasp.
Then it is finished!
You may think what a simple tutorial, it is right!! You can finish this chain necklace tutorial even if you are a green hand. Chain necklace always looks cool and the black glass beads also look mysterious. Do you like it? You can make it with few tools and materials, so have a nice try!




DIY Cute Watermelon Pendant Necklace for Children


Fruit is indispensable to the wholesomeness of our body. But have you ever thought of wearing fruit pendant jewelry? Then you can’t miss this watermelon necklace because wearing such a cute fruit necklace is so enjoyable a thing in this scorching summer!!! A watermelon pendant necklace is an unparalleled gift for your adorable and lovely kids. Today, I will teach you how to make cute watermelon pendant jewelry.
DIY Cute Watermelon Pendant Necklace for Children
Materials needed for this watermelon pendant necklace
Colorful seed beads
Brass wire
DIY Cute Watermelon Pendant Necklace for Children3
First, cut the brass wire to about the length of 12cm, 14cm, and 15cm.Thread the seed beads onto the wire and then make loops at both ends as what the pictures.
DIY Cute Watermelon Pendant Necklace for Children4
Second, attach the two green half circles and one white half circle to a long eyepin. Add red seed beads onto it and attach it to the other end.
Third, open the loop at pin bottom, and hook it on the white half circle. Thread red and black seed beads according to the length the pin. Attach the pin directly to the horizontal pin.
Fourth, trim off the extra pin. Repeat to make the rest pin to fill the whole half circle.
DIY Cute Watermelon Pendant Necklace for Children5
Fifth, open the links the chain and attach them to the pendant. Embellish the chain with some headpins and seed beads.
DIY Cute Watermelon Pendant Necklace for Children6
Gorgeous!!! What a wonderful watermelon necklace it is, isn’t it? The craft is easy to make and the materials cost next to nothing. Besides, this fun watermelon pendant will turn out to be a gorgeous accessory to keep as well as a special handmade gift to give away.
DIY Cute Watermelon Pendant Necklace for Children2

How to Make Turquoise Dragonfly Necklace


Do you want to learn how to make exquisite beaded necklace? Today, I will show you a tutorial about making turquoise dragonfly necklace with glass beads and pearl beads. DIY beaded necklace is very easy and this necklace which I will teach you today is very suitable for summer!


Materials needed in DIY beaded necklace:

materials about beaded necklace tutorials

Turquoise bead

Pearl bead

Czech glass bead

Jump rings

lobster clasp

Tiger Tail

Instruction on how to make beaded necklace:

Step 1:

  • Add six pearl beads in the tiger tail and cross two ends of the wire through a red glass bead and then tighten the jewelry wire.
  • Slide six pearl beads to the two sides of wire, cross both two ends through a beige pearl bead, then tighten the tiger tail wire.



Step 2:

  • Slide one turquoise bead through each end of tiger tail. Then, cross two turquoise beads to fix these beads and tighten wire.
  • Thread two Czech glass beads to each ends of wire and cross one pearl bead. Then, slide two Czech beads again.

beaded necklace tutorial


Step 3

beaded necklace tutorials


Now, cross one pearl bead and add six pearl beads to each end of wire as the above picture shows.

Step 4:

  • Cross one Czech bead to the both ends of wire, and add pearl beads and Czech beads according to the orders of above picture to tiger tail wire.
  • Cross Czech bead to wire and tighten it.
  • Add six pearl beads to the two ends again.
  • Last, cross pearl bead through the wire.

beaded necklace tutorials

Step 5:

  • Repeat above steps to finish the other six beaded patterns.

beaded necklace tutorials

  • Cross pearl beads to both ends and tie it together.

beaded necklace tutorials

Step 6:

Use a lobster clasp and jump rings to link the necklace.

beaded necklace tutorials

Now, a beaded dragonfly necklace is well done!

beaded necklace tutorials

So beautiful turquoise dragonfly beaded necklace! You can also use turquoise beads and pearl beads to make the same pattern necklace like this one, I think it will be also delicate and charming.

Share this if you love it!