Do you have any struggle with choosing a necklace to match with your new dress? Have a look at this flower necklace with pearl beads. It can be matched with different kinds of clothes.
Before making this double strands flower necklace with pearl beads, you need to prepare the following materials:
10mm Faceted Round Glass Beads
6mm Bicone Glass Beads
8mm Amethyst Beads
10mm Pearl Beads
6mm Pearl Beads
2mm Golden Seed Beads
Purple Acrylic Flower Beads
Silver Spring Clasp
Silver Bead Tips
Silver Bead Caps
Round Nose Pliers
Long Nose Pliers
Then you can follow these steps to make the necklace:
Firstly, make the linking bead patterns by sliding pearl beads and flower beads to eyepins, and make loops .There should be 11 in total;
Secondly,make the bead tassel patterns by adding glass bead, pearl beads, flowerbeads together through a headpin,and make loops at the ends. Then attach the tassel pattern and the linking patterns together as the following pictures show.
Thirdly, make the main necklace patterns by using tiger wire. You need to add a bead tip to the middle of the wire and close the bead tip to fix both wires.Then add 3 seed beads and a bicone glass bead to each wire, keep adding beads, linking patterns, and bead tassels to both wires like the last picture shows.
Fourthly, complete the main necklace pattern by Keeping adding beads, linking patterns, and bead tassels to the wires until you get the whole necklace pattern like the following picture shows.
Finally, you can make your own double strands flower necklace with pearl beads :
Pearl beads necklace is classical and elegant, combined with double strands flowers makes it more beautiful and fashionable. If you want to try this type of necklace, you can start to make this charm necklace right now!
Hi, friends. When did you make your wire wrapped jewelry last time? I think you can start to make you next wire jewelry now. Today, I am going to show you a tutorial on how to make a wire wrapped pendant necklace for girls. Trust me, you will fall in love with it.
Supplies needed for wire wrapped pendant necklace:
Brass Jump rings
Brass Cross Chain
8mm Blue Round Crackle Glass Beads
Brass Eye Pins
2mm Brown Aluminum Wire
Chain Nose Pliers
Round Nose Pliers
Side Cutting Pliers
Instruction on how to make wire wrapped pendant necklace:
Step 1: Make the wire wrapped pendant
Firstly, cut off a piece of aluminum wire and fold it into half, then twist the wire into a drop shape;
Secondly, continue to twist the wire and make five drop patterns in total;
Thirdly, cut off the extra wire.
Step 2: finish this wire wrapped pendant necklace
Firstly, make six blue glass beads dangle with eyepins;
Secondly, add two dangles onto two tops of the drop wire pattern like picture shows;
Thirdly, prepare six pieces of cross chains and connect them with six blue glass beads dangles, do it as the blow picture shows;
Fourthly, connect two ends of chains with a lobster clasp.
Here is the final look of the wire wrapped pendant necklace:
It can be finished soon, yes? How do you think of this wire wrapped pendant necklace? Really beautiful jewelry design, don’t you plan to have a nice try? Then just do it, waiting for your crafts!
Hello, dear friends. How are you? Do you have tassel necklace? If no, you can consider making one for yourself. Today, I am going to show you a tutorial on how to make a special tassel chain necklace with colorful glass drop beads. Do you have any interest after seeing this necklace picture, then just follow the steps to finish it.
Jewelry making supplies for tassel necklace:
11x8mm Faceted Glass Drop Beads
3mm Gold Bead Spacers
3x2mm Gold Twisted Chains
6x4mm Gold Cross Chains
Gold Jump Ring
Gold Spring Clasps
Long Nose Plier
Round Nose Plier
Step 1: make the basic part of the chain
Firstly, cut off a piece of golden chain with suitable length according to your choice. And add a jump ring and a spring clasp on the end of the chain.
Secondly, connect the clasp with the chain in suitable position.
Thirdly, slide one glass drop bead onto a headpin and make a simple loop, then make enough same beaded dangles with the same steps.
Fourthly, pick out one bead dangle onto the end of the chain.
Step 2: finish this tassel necklace making
Firstly, add these bead dangles on the golden chain and keep the suitable distance between two dangles.
Secondly, cut off many pieces of chains (about 5cm to 10cm) and attach them on the golden chains, you can do it as the picture shows.
Then this chain tassel necklace has been finished!
Look at the final tassel necklace, how do you think of this special chain necklace? It is really easy to finish, right? You know that pretty clothes are always needed to match the beautiful jewelry. So do not miss the fantastic project. Looking forward your great works!
Hello, guys. Are you searching for pearl necklace recently? If yes, then you should pay more attention on this project. Today, I will show you a tutorial on how to make a long chain necklace with pearl beads. Do you have any interest for it? Then let’s just see it now.
Supplies needed in making pearl necklace:
Golden bead cap
12mm white pearl beads
8mm white pearl beads
Golden jump rings
Golden lobster clasp
Golden brass ball headpin
Golden iron chain
Wire cutting plier
Round nose plier
Step 1: make beaded dangles
Firstly, slide an 8mm pearl bead onto an eyepin and make a simple loop at the other end with jewelry plier.
Secondly, continue to make pearl beaded dangles with the same steps until you have 40 dangles in total.
Thirdly, connect all the dangles together one by one in order.
Step 2: finish this pearl and chain necklace making
Firstly, cut off a piece of golden chain with the same length of the beads link.
Secondly, connect two ends of the chains and beads link. Then add a lobster clasp to one end of the chain.
Thirdly, slide a 12mm pearl bead and a bead cap onto a headpin and make a simple loop at the end. And add this bead dangle to the middle part of the beaded link and connect two chains with a jump ring. Then connect two ends with lobster clasp.
Now this pearl beads and chain necklace has been finished!
Have you also finished this necklace making? It is easy to make, right? Then just share this project with your friends and they will like it. Have fun~
Hey, guys. Nice to see you. Hope everything is going well with you. Do you like wire pendant necklace? How about wire and pearl bead pendant necklace? Today I am going to show you simple tutorial on how to make wire and pearl bead pendant necklace. You can try to make one for yourself if you also like it.
Supplies needed in wire and pearl dangle necklace:
1mm Aluminum Wire
Side Cutting Plier
Round Nose Plier
Flat Nose Plier
Step 1: wrap the wire into a cage in shape
Firstly, cut off the aluminum wire with suitable length, and twist the wire into in two halves, then wrap them in circles with opposite position and ensure that the largest circle can hold the pearl bead.
Secondly, fold the two parts in “s” shape.
Thirdly, pull the two ends of the wire with jewelry plier slightly. Fill into a pearl bead when it can hold.
Fourthly, close the cage and adjust the coil slightly.
Step 2: finish this wire pendant necklace
Firstly, cut off the chain with suitable length according to your neck.
Secondly, add the chain to the wire pearl pendant, then add a jump ring to connect two ends of the chain.
Then this pendant necklace has been finished!
It is so simple, agree me? It just needs so few materials and tools. Trust me, you can finish it if you decide to make it. And you also can enjoy the pleasure of the process. Hope you will be willing to share your crafts with us. Have a nice try!
Hi, friends. Happy to see you again. Hope everything is OK with you and your family. Today I am going to share a lovely long chain necklace with you guys. I know that chain jewelry patterns always impress you very much, so I am excited to show you how to make a golden chain necklace. You can read this tutorial and try to make one. Let’s start!
Supplies needed in making long chain necklace:
Gold Brass Beads
Handmade Blown Glass Beads
Gold Brass Bead Cap
Gold Brass Headpins
Long Nose Plier
Round Nose Plier
Side Cutting Plier
Step 1: prepare pendant
Firstly, prepare some gold wires and a glass beaded pendant, and add the gold wires into the bead.
Secondly, choose two gold bead brass caps and attach them to the two sides of the beaded pendant.
Step 2: add gold chain
Firstly, take out a gold jump ring and connect it with the top side of pendant.
Secondly, add the gold chain to the pendant, as picture did.
Step 3: add brass beads to the chain
Firstly, slide two brass beads in two sizes onto a headpin, and make a loop at the end. Then repeat this step to get your desired beaded parts.
Secondly, add the beaded dangles we made last step to this gold chain, and you can decide the position the dangles are.
Then this long gold chain necklace is finished!
Now, can you finish your own long chain necklace with following the project. You know that you can wear chain necklace whenever in summer or winter, and you can match it with your dress or your sweater. Just take an action, and I promise you will love it! Good luck!